初始化配置
admin
Admin@123
y
Admin@123
Admin@xxx
Admin@xxx
SSH
ssh authentication-type default password
ssh user sshadmin
ssh user sshadmin authentication-type password
ssh user sshadmin service-type stelnet
rsa local-key-pair create
stelnet server enable
ssh client first-time enable
display ssh server status
display ssh user-information
开启tracert
undo firewall defend tracert enable
ip ttl-expires enable
ip unreachables enable
icmp ttl-exceeded send
icmp host-unreachable send
ASPF
firewall detect ftp
acl 3001
rule permit udp destination-port eq tftp
quit
firewall interzone trust dmz
detect ftp
detect user-defined 3001 outbound
quit
reset firewall server-map ip x.x.x.x
debug
display firewall session table ver destination global 125.64.33.5 protocol tcp destination-port global 2200